STB EMU App Setup For Crown IPTV


This post will take you through setting up the STB EMU app that you would need to use on your Android box for CROWN TV. First off, you will need to install the app itself. CLICK HERE to download the latest version of STBEMU from my website. Once it’s installed, open the app.


These screen shots are actually from my phone, so the orientation may look a bit different from what you see on your Android box, but it’s close enough that you should be able to figure it out.
This will be the first screen you see. Click on the “CONFIGURE” button.

Next you’ll see this screen. Click on the “Profiles” option.

This is the profiles screen. It would actually show at the same time as the profiles screen, just on the right hand side. On my screen it’s showing “New profile #5f7f85” but it will show a different code for you. Click on this profile.

On this next menu, you can click on “Profile name” to change the name of the profile if you want, but it is not necessary. Afterwards, click on “Portal settings”.

Click on the “Portal URL” option, and you will change it to “” where it shows (thats an old address) in the pic below.

Once you’ve changed the address to match what’s shown above, you can click back (or ESC depending on what you are using to control the box with) until you get to the main screen again.

Once back at the main screen, bring up the overlay menu shown above by either double clicking the left button or ESC on a keyboard. If you can’t bring this menu up, then you can accomplish the same thing by closing and reopening the app.

If you click on the 3 horizontal lines in the top left corner, you will see the above menu. Click on “Reload portal”. It should now reload and it will bring you into the IPTV screens if everything else has been set up correctly.
NOTE: if you don’t have an account set up with us (or someone else) it will not load into any IPTV screens. You must have an account with someone before it will work.


If you are setting this up for the first time and are getting ready to open an account, you will need to know the MAC ADDRESS associated with the STB EMU app. You can find that by going back to the screen that had “Portal settings” and clicking on the option below it instead called “STB Configuration” You will find the MAC ADDRESS on this screen. This what we need to set up and account for you with Crown TV. It works like your login and password. The screen looks like this:

Another problem I’ve seen come up is that once everything is set up, the screen loads really small and off in the corner. If this happens, you will need to go in and change a setting.

From the first settings screen, choose “Common settings”.

This menu will come up next. Choose “Browser settings”.

The only option here is “Scaling method”. Choose “Alternative 1” from the list that comes up. Now go all the way back to the main screen, repeat the “Reload portal” options to get it to reboot with you new settings.

That’s should do it! If everything is set up correctly, you should see the main IPTV option screen.

As always, The Naughty Wizard is here to help if things go wrong.

Have fun!

Leave a Reply

%d bloggers like this: